Installing the Kiosk

The NCR SelfServ™ XK22 (2246) Kiosk must be secured in the installed location so that it cannot be moved.

The following required items must be ready prior to the kiosk installation:

•The floor, countertop, or wall must be prepared.

•For wall mount configuration, the cable access cutout must be prepared.

•The mounting holes must be drilled.

•The anchors must be installed.

•The security bolts must be prepared.

Note:  Bolts and anchors used to secure the kiosk are not supplied by NCR. They must be provided by the owning organization.

For more details, refer to the NCR SelfServ™ XK22 (2246) Site Preparation Guide (BCC5-0000-5390).